當前位置: 康沃真空網  > 行業資訊 > 行業分析 > 正文

渦旋真空泵渦旋齒失效形式分析

        渦旋真空渦旋齒失效形式分析 強建國(蘭州理工大學機電工程學院,甘肅蘭州 730050)
        摘 要:基于渦旋真空泵渦旋齒的工程實踐以及應力、變形的模擬結果,分析渦旋齒的主要失效形式。分析表明:渦旋真空泵渦旋齒中央部分的溫度和工作壓力高,變形和應力較大,應力集中明顯。渦旋齒的常見失效形式有磨損、點蝕、膠合、齒裂以及過大變形等,渦旋齒的軸向變形和磨損,渦旋齒膠合對渦旋真空泵的性能有很大的影響。選擇合適的材料,提高材料性能并降低應力集中,降低渦旋齒溫度和對渦旋齒進行修正等都是避免渦旋齒失效的有效方法。
        關鍵詞:渦旋真空泵;渦旋齒;失效;分析 Analysis of failure modes for scroll wrap in scroll vacuum pumpQIANG Jian-guo(School of Mechano-Electronic Engineering, Lanzhou University of Technology, Lanzhou 730050, China) Atract: Based on engineering practice and simulation results of stre and deformation for a scroll wrap in a scroll vacuum pump, the main failure modes are analyzed. In the centre part of scroll wrap, the temperature and ier preure loads are higher than other parts, this results in larger stre and deformation, stre concentration is also obvious. This analysis shows that wear-out, surface pitting, scuffing failure, seizure, fatigue breakage, and exceive deformation are main failure modes of scroll wrap. The axial deformation and wear-out, and seizure failure have more significant influence on scroll vacuum pump’s performance. Selecting aropriate material, improving the properties of material and reducing stre concentration, reducing the temperature of scroll wrap, and modifying the scroll wrap are several valid methods to avoid failure.Keywords: Scroll vacuum pum Scroll wra Failure mode; Analysis
標簽: 渦旋真空泵真空設備真空技術  

溫馨提示:
如果您喜歡本文,請點擊右側分享給朋友或者同事。

網友評論

條評論

最新評論

關注排行